Abstract

Following anterior cruciate ligament (ACL) injury of the knee, the functional hop test (an averaging of 4 component hop tests including single-hop, triple-hop, cross-over-hop, and 6-meter-hop) is commonly used by sports medicine physicians, doctors of physical therapy, and athletic trainers in return-to-practice and return-to-play decision making. In this case report, the functional hop test was applied to a 31-year-old recreational basketball player status-post full-tear of the anterior talofibular ligament (ATFL) to examine the applicability of a standardized, efficient, and easy-to-administer functional test in making return-to-play decisions following an ankle injury. The functional hop test was administered 5 times across a treatment course of 11 physical therapy sessions emphasizing pain-free range of motion, baseline strength, weight-bearing loading, and sport-specific training. The functional hop test was found to be a helpful (albeit imperfect) tool for clinical decision-making following an ankle injury. Specifically, improvements in landing skill/confidence of single hop accounted for the greatest gains in total score in the early phase of rehabilitation, while momentum and plyometric skill/control of triple hop accounted for the greatest gains in total score in the later phase of rehabilitation. Modification of the functional hop test to include sub-component tests of strength, endurance, and/or lateral hops are discussed.

Keywords

Introduction

Ankle injury, particularly in basketball and soccer athletes, has sparked significant attention in the realm of sports medicine [1]. Recent studies reveal that in girls’ basketball, the incidence of ankle injury stands at 2.08 per 1,000 athletic exposures while for boys, the incidence is slightly lower at 1.83 per 1,000 athletic exposures. Due to the demand of the ankle during repetitive cutting, running and posterior chain loading, soccer players face a common challenge [2]. The result of these high-speed lateral movements performed on the field or turf is that 66% of soccer injuries result in lateral ankle ligament injury with an additional 9% resulting in medial ankle ligament injury [3]. The primary mechanism of injury associated with anterior talofibular ligament (ATFL) injury is ankle plantarflexion (PF) with concurrent inversion (IV) [4]. Return-to-sport assessment status-post-ankle injury relies heavily upon objective measures, notably the single-leg calf raise to failure, whereby a threshold of 25–30 repetitions is considered indicative of sufficient strength [5]. However, the evaluation and treatment of ankle injury lacks uniformity among clinicians, both in terms of subjective surveys and objective measures and subjective assessments such as kinesiophobia surveys [6]. Y balance testing emerges as a valuable tool for assessing dynamic neuromuscular control, particularly in single-leg stance, serving as both a treatment modality and a potential screening tool for athletes prone to ankle injury [7]. Traditional return-to-play (RTP) testing encompasses a spectrum of assessment tools (from single-leg calf raises to sport-specific drills) aiming for an 80% success rate between the injured and non-injured limbs [4]. Initially proposed by Daniel et al. [8] to assist in clinical decision-making regarding RTP following anterior cruciate ligament (ACL) injury; the function hop test (FxlHT) is an assessment battery consisting of 4 component tests including the single-leg single-hop test, the single-leg triple-hop test, the single-leg cross-over hop test, and the 6-meter hop test [8]. The component tests are averaged, and the involved leg is compared to the uninvolved leg with a minimum threshold score of 90% being considered sufficient for return to play [9]. There is a paucity of literature on, and limited clinical use of, the FxlHT following ankle injury, ATFL specifically. Lateral hop abilities, however, exhibit a strong correlation with physical capability and return-to-sport confidence in ankle injury cases [10]. The primary aim of this case report was to assess the potential value of the functional hop test in tracking functional progress and in clinical reasoning regarding RTP status-post ankle sprain injury and rehabilitation. If suboptimal, we secondarily hoped to uncover additional efficient and effective component tests with which to modify the functional hop test for future case study and eventual validity testing.

Case report

A 31-year-old, 1.7 m tall, 72.57 kg male subject presented for evaluation with left ankle pain following a recreational basketball injury 2 weeks prior. The subject was playing basketball and landed on another player’s foot. The subject was quite active prior to injury, playing recreational basketball 2 to 3 times a week. Magnetic resonance imaging (MRI) confirmed full thickness tear of the ATFL. The subject had a functional pain scale (FPS) score of 6/10 pain [11]. He scored a 44 on a Focus on Therapeutic Outcomes (FOTO) survey with a predicted minimum important improvement/difference (MCII) of 70 [12]. The subject opted for conservative physical therapy intervention to address medical and recreational impairments versus cortisone injection or surgery.

The FxlHT, FPS and FOTO were utilized to assess and monitor pain intensity and physical functional status from evaluation through discharge. Upon initial evaluation of left ankle range of motion (ROM), a limitation of 0 degree dorsiflexion (DF), 25 degrees of IV, 15 degrees of eversion (EV), and 50 degrees PF was noted. Left ankle strength was similarly limited as manual muscle testing revealed DF 4–/5, PF 4–/5, IV 4/5, and EV 4/5. The subject’s maximal effort was inconsistent and questionable due to a subjective report of pain. The subject presented with positive anterior drawer and talar tilt and had severe tenderness to palpation of ATFL and calcaneal fibular ligament (CFL). Finally, the initial functional hop test score was 94% compared to the unaffected limb.

The subject’s episode of care included 11 visits during their care episode divided into four main phases (Table 1). Phase 1 spanned weeks 1–2, phase 2 covered weeks 3–4, phase 3 extended from weeks 5–6, and phase 4 involved a discharge assessment visit. The goal of phase 1 was to restore pain-free (ROM) and baseline strength necessary for light resistance and stability training in phase 2. Phase 2 involved weight-bearing loading activities, functional movements (such as lateral lunging and forward lunging on 3-way step taps) and proprioceptive feedback exercises. Ankle instability exercises, including Y balance testing, were employed to enhance ankle stability [13]. The subject demonstrated good tolerance for double leg (DL) depth drop landing in phase 2, absorbing force well from a 12-inch drop. Phase 3 consisted of sport-specific activities such as “euro step” driving, single-leg hopping to box, single-leg depth drops from a 6-inch step. The discharge phase encompassed single-leg balance treatment and final data collection of objective measures including FxlHT, ROM and single-leg calf raise test.

Discussion

The primary focus of this case report was the exploration of the functional hop test as a tool for making RTP decisions following ankle injury. The prevalence of ankle injuries in sport underscores the need for standardized, efficient, and effective assessments from which to guide return-to-sport decisions. Incorporation of the functional hop test emerges as a valuable addition to the process but has some limitations of applicability when generalized from the knee and adapted to the ankle when used to guide rehabilitation strategies and inform decisions about readiness for return to competitive play. For example, a 2019 review published by Davies et al. [14] in the journal Sports Medicine recognizes that as applied to the knee, “hop tests display good reliability and are sensitive to change”. Although they go on to question the use of more than 2 hop tests “due to high collinearity and no greater sensitivity to detect abnormality” [14], when applied to the foot (recovery from ATFL injury in the athlete), we would encourage clinicians and researchers to use all 4 component tests of the functional hop test as the single-hop test appears more sensitive to change in the earlier phases of rehabilitation, while the triple-hop and cross-over-hop component tests appear more sensitive to change in the later phases of rehabilitation. Furthermore, just as Davies et al. [14] advocate the use of additional component tests that examine multiple planes of motion with respect to knee/ACL recovery, we advocate the use of the lateral hop test as an additional component test within a modified version of the functional hop test because studies have shown high electromyography (EMG) activity in differences between uninjured and injured ankles comparatively with EV and IV stabilizers [15]. The ankle then becomes a more stable base allowing for more dynamic movement and force production [16]. This allows clinicians to assess progression and develop increasingly sensitive RTS metrics as applied to athletes status-post ankle injury. The subject’s journey from initial testing to discharge unveils a narrative of progressive improvement, highlighting the intricate relationship between physical rehabilitation and self-report of readiness to RTP (Figure 1). Notably, the subject demonstrated improvements in the FxlHT through week 3 with a plateau and decline beyond that point. It is hypothesized by the authors that single-hop component test initially improved most rapidly and as it began to plateau, momentum-mediated component tests requiring balanced landing and immediate plyometric response (e.g., triple hop) then began to improve. With exercise prescription focusing on motor control and balance exercises, jump tests improved substantially as seen in Table 1. This was most notable between phases 2 and 3.

Display full size

Figure 1. 

Functional hop test progression (thick blue line) with component sub-test

Across the episode of care, the FxlHT improved modestly from 94% to 97%, subsequently regressing to 96%. The score may be helpful in RTP decision-making based on the metrics of an ACL reconstruction [8, 10], but little is known regarding threshold measurements as applied to status-post ankle injury and rehabilitation. This improvement may be helpful in clinical decision-making regarding RTP and possible injury prevention, but in terms of RTP for ankle injuries additional tests may need to be included. The subject also demonstrated adequate gastrocnemius and soleus strength based on single-leg calf raise performance [17]. The subject increased FOTO score from 40 to 90 (well beyond MCII of 70), and furthermore verbalized feeling “very confident” and “100%” for RTP at his discharge visit.

The FxlHT emerges as a potentially useful tool for assessing the propulsion and deceleration phases of landing, crucial for athletes involved in activities with acceleration and sprinting [18]. Immediate feedback provided by these tests aids in evaluating an athlete’s ability to control force, influencing the progression toward RTP following ankle injuries. However, the FxlHT is limited in that it does not include a lateral hop component test. Modification of the functional hop test by incorporating a lateral hop component test may therefore provide a more comprehensive assessment by having the ankle joint go through a wide range of IV and EV in a dynamic situation [4]. The lateral hop test, for example, has shown significant value in RTP decision-making following ankle injury [14]. High muscle activity is also involved with stabilizing the ankle during lateral hop tests [15]. There may be a greater sensitivity to change in overall FxlHT test results by including a lateral hop test component. It is hypothized that doing so may provide more sensitive information for clinician use in RTP decisions [8]. The criterion validity of multi-planar testing in athletes engaging in multi-plane movements, as seen in sports such as soccer and basketball, cannot be underestimated. Lateral hop testing has been argued to be at least as important to forward hop component tests as applied to the knee [15] due to the high-speed lateral movements required of these athletes. Incorporation of a lateral hop test as an additional component test in an ankle-specific functional hop test may result in greater sensitivity to change, in a more linear fashion, throughout the entirety of the rehabilitation process. Finally, it must be considered that as a case report, caution should be taken in directly applying the ideas generated into clinical practice without further study. The FxlHT may in some cases prove to be a valuable tool in making RTP decisions following ankle injury, but may be insufficiently sensitive to nuanced change without additional modification (e.g., addition of lateral hop component test), particularly in phase 3. This case study also suggests that subjects with complete ATFL tear can return to sport without surgical intervention, but rather the application of physical therapy. Future research should explore modification of the functional hop test with additional component tests in pursuit of the optimal test-item-cluster in the determination of RTP.

Abbreviations

ACL: anterior cruciate ligament

ATFL: anterior talofibular ligament

DF: dorsiflexion

DL: double leg

EV: eversion

FOTO: Focus on Therapeutic Outcomes

FxlHT: function hop test

IV: inversion

PF: plantarflexion

ROM: range of motion

RTP: return-to-play

Declarations

References